Automatic Pour / Cloud / Freezing Point Tester mpc-6

Tanaka’s new Automatic Pour / Cloud / Freezing Point Tester mpc-6 is designed with “Simple, Reliable, and Robust” concepts. The mpc-6 requires a mere 4.5 mL sample and provides quick automatic determination of 3 key cold property measurements with high precision.

INNOVATIVE

Tanaka’s original mini test methods which require much less
sample volume (4.5 mL) and short testing time compared to
conventional manual methods

SMALLEST FOOTPRINT

Very small width of 16 cm allows for most efficient use of bench space.

3-in-1

Test pour point, cloud point, and freezing point with just one instrument. Pour and cloud can be run simultaneously in a single run.

Eco-friendly

Equipped with CFC-free cooler achieving low noise, low vibration, and energy-saving. Sample temperature of -90℃ can be reached without external chiller.

● Intuitive 7-inch Touch-Screen Operation: Simplicity ensures smooth operation.
● Extremely Simple: Set sample cup, input expected points and then press START. Pre-heat and cooling sequence are run automatically. Pour and cloud point results can be obtained in a single run.
● Search Mode for Unknown Samples: The new SPE mode will test pour point with different pressures so that parameter optimization can be easily done.
● Data Connectivity and Management: Data can be exported to LIMS or optional printer via Ethernet. Data storage for up to 50 data can be secured with password.

Pour / Cloud/ Freezing Point Tester MPC Series

TANAKA's MPC series has been designed for automatic determination of POUR POINT (PP), CLOUD POINT (CP) and FREEZING POINT (FZ) with small specimen size and shorter test cycle time while securing better test precision than the conventional manual methods.
PP measurement is by "AIR PRESSURE METHOD" (ASTMD6749), and CP measurement is by "SMALL TEST JAR METHOD" (ASTM D7683).

The epoch-making automatic PP test method yields 1 ℃ test resolution, while the CP and FZ methods yields 0.1 ℃ resolution.

Specifications

Compliant Methods	PP : ASTM D6749
	CP : ASTM D7683
Reference Methods	PP : ASTM D97, ISO 3016, JIS K 2269
	CP : ASTM D2500, ISO 3015, JIS K 2269
	FZ : ASTM D2386, ISO 3013, JIS K 2276
Measuring Range	-90 ℃ to +51 ℃ (at room temperature of 25 ℃ )
Temperature Range	-100 ℃ to +70 ℃ (at room temperature of 25 ℃)
Measurement Modes	PP/CP, PP, CP, FZ
	PP Pressure : L, H, VH, UH, SPE, Custom
	PP Intervals : 1.0 ℃, 2.5 ℃, 3.0 ℃, Custom
	CP Intervals : 0.1 ℃, 1.0 ℃
	FZ Intervals : 0.1 ℃, 0.5 ℃
Size (W x D x H)	160 mm x 600 mm x 620 mm
Weight	30 kg
Power Consumption	AC 100 V to 240 V 200 VA (max) 50 / 60 Hz

Pour/Cloud Point Tester Petroleum/Refining/Pipeline Lubricants Biofuels Electric/Power Plants Waste Treatment/Oil Recycling Automotive Petrochemical/Solvents Diesel Oil Fuel Oil Jet Fuel/SAF Biodiesel Lubricants ASTM D97 ASTM D2500 ASTM D6749 ASTM D7683 ISO 3015 ISO 3016 JIS K 2269

Distillation TesterDistillation Tester

CFPP TesterCFPP Tester